433 MHz wireless receiver
An IP65 rated 3-channel receiver, 150 metres line of sight, 3x Volt free contacts as well as lighting control outputs.
The RFX-3 receiver monitors the active state of up to three Opal RFX passive infrared detectors. The RFX-3 can be mounted externally or internally with a line of sight reception distance of up to 150 metres to the detector(s).
Part Codes - GJD017 RFX-3 Receiver
|
Supply:
|
12VDC @ 35mA nominal (9 to 20 VDC maximum) |
|
Outputs:
|
CCTV Outputs 3 x independent channel outputs (24hr) Selectable N/O (form A) or N/C (form B) Individual timers 0.4 to 60 seconds after last detection. Non volatile memory.’A’ Outputs 3 x independent switching -ve outputs (24hr) rated @ 250mA – 0.4 second on detection.RF Loss Outputs 3 x RF signal loss alarm outputs: -ve switching rated @ 250mA’S’ Outputs 1 x photocell controlled -ve switching. Active 60 seconds after last detection |
|
Tamper:
|
Back & front tamper volt free output (form B) |
|
Indication:
|
Independent channel active & low battery outputs / LED’s |
|
Operating Temp:
|
-20°C to + 55°C. Conformally coated electronics for increased stability |
|
Housing:
|
High Impact ABS Housing |
|
Protection Rating:
|
IP 65 |
Related Products
Downloads