literature Distributors News Contact us
      cctv Intruder alarm Security Lighting  
IR Programmer Specifications
• The user can individually programme a number of configurable settings.
• When power is applied to the D-Tect the user has a time slot of 5 minutes to start using the IR key fob. The timer can be reset by either pushing the program button or by removing and then re-applying power.
• Alterations to the settings are stored in the detector's non volatile memory.
• The key fob is supplied with 3 new LR44 size batteries.

IR Programmer Code GJD303
Cable Entry Adaptor Specifications
• Suitable for 20mm conduit protected surface run cables.
• Durable zinc alloy metal housing.
• Integrated rear tamper mechanism designed to perfectly interface with rear tamper plunger fitted on all D-Tect’s.
• Supplied with D-Tect body locking screws plus wall fixings.

Cable Entry Adaptor Codes
GJD304 Silver zinc alloy
Pole Mount Clamp Specifications
• Two powder coated metal pole clamps c/w threaded bar and locking nuts & washers.
• Supplied with separate tamper plates and fixing screws.

Pole Mount Clamp Code GJD305

 

 

 
Wire guard Specifications
• 26mm2 steel wire mesh, plastic coated.
• 180mm diameter.
• 160mm deep.
• 2 x fixing lugs with 8mm holes 225 mm apart.

D-Guard Code GJD308

 



D-Tect WalkTester Specifications
Power 9VDC (PP3 Cell)
Current Standby: 0.5mA
Operating: 30mA
Operating Temp -20°C to +55°C
Protection Please note that the WalkTester is not waterproof and should not be used in wet weather conditions. The housing is made from high impact ABS plastic.
Dimensions 118mm x 47mm x 25mm

D-Tect WalkTester Code GJD380		  
 
 

D-Tect IR Programmer Key Fob
Installation tool to remotely and conveniently programme
D-Tect's. Programme the following settings without disturbing your D-Tect unit:
• Range
• Pulse Count
• LED
• Output LUX level
• CCTV contacts
• Timer

D-Tect Conduit Cable Entry Adaptor
For surface mount conduit/cable installations. Complete with integral wall tamper system.


Pole Mount Clamp - (D-Tect, Elite & Opal)
For mounting GJD detectors on poles from 40mm to 170mm in diameter, max two detectors per clamp kit.

D-Guard - (D-Tect, Elite & Opal)
Steel wire plastic coated guard

D-Tect WalkTester
An installation tool to help set up D-TECT's on site
D-TECT WalkerTester

For more information, click here to download a manual or specification sheet.